How to Program Chevy Garage Door Opener?

Discover all of the features that you can unlock with the Chevy Homelink when you learn how to program your Chevy garage door opener. We’ve broken it down in an easy step-by-step guide that will allow you to get the most out of your new vehicle and all the features it offers for your Minnetonka drives. Learn how to use your Homelink option and be sure to contact us if you have any questions.

How to Set Your Chevy Garage Door Opener | Initial Setup

1. Confirm that there is a recent battery in your remote control transmitter.
2. Turn on your ignition with your vehicle facing your garage.
3. Find your vehicle Homelink buttons on your visor, rearview mirror, or the overhead console.
4. Position the remote control transmitter from 1 to 3 inches from the Homelink control buttons. At the same time, press your preferred Homelink control button and the remote control button.
5. Press the remote control button until the Homelink indicator light comes on and either becomes a solid light or quickly.
6. This change means that the frequency signal has been noted in the system.
7. Press the Homelink controller button two times for activation.
8. A solid Homelink indicator light indicates that programming is finished. If the Homelink indicator light quickly flashes instead, the troubleshooting steps below can help you understand the issue.

Chevy Truck Garage Door Opener Troubleshooting

If the Homelink indicator light is quickly flashing after you’ve gone through the above steps, be aware that you have a rolling code system stored in the memory of your garage door opener and remote device. With these simple additional steps, you can program your Chevy truck Garage door opener:

1. Leave the car and find the garage door opener motor inside your garage.
2. Search for the “Smart” or “Learn” button, generally beside the antenna wire hanging on the back of the motor.
3. Push the “Smart” or “Learn” button once and you’ll have a 30-second window to finish the next step.
4. Come back to the vehicle and press your programmed Homelink control button three times. This will finish the activation process.
5. For the two Homelink buttons still remaining, repeat the previous four steps. This should activate your garage door.
6. The original remote control transmitter and the Homelink wireless control system, once programmed, can be used with your Chevy garage door opener.

Discover More at Suburban Chevrolet

If you need help programming your garage door opener, or you have any questions, our Eden Prairie service team here at Suburban Chevrolet is here to help your vehicle back in perfect working order. Give us a call or come on in to our dealer near Bloomington and Hopkins. We look forward to helping you!